Forged Fittings Socket Weld And Threaded
Looking for high quality, machine finished Forged Pipe Fittings?
The ASME B16.11 fixtures are made with the finest attention to detail. The focus here is to create a product that will hold the plants and the machine tightly in place and prevent any kind of leakage and damage.
Why use Forged Pipe Fittings ASME B16.11?
- Heat code traceability
- Can sustain pressure greatly
- High quality CNC machine finish
- Threw chambers cleaning system
Why buy from Forxar Industries?
We design Butt Weld Fittings using formed the finest quality raw material. We also offer a variety of shapes and sizes likeEqual tee / Reducing Tee / Full Coupling / Half Coupling / Street Elbow / Bull Plug / Boss / Union (Male/Female) / 90o Elbow / 45 Elbow / Equal Cross / Reducing cross / Pipe Cap / Swage Nipple / Lateral / Branch Outlets / 45 Lateral Tee / Lateral Outlet..
At Forxar Industries, we are 100% committed to quality and customer satisfaction.
Types | Equal tee / Reducing Tee / Full Coupling / Half Coupling / Street Elbow / Bull Plug / Boss / Union (Male/Female) / 90o Elbow / 45 Elbow / Equal Cross / Reducing cross / Pipe Cap /Swage Nipple / Lateral / Branch Outlets / 45 Lateral Tee / Lateral Outlet. |
Standards | • ASME B16.11 • JIS B2302 • Bs3799 • MSS SP 79 • MSS SP 83 • MSS SP 95 |
Size | Size: Thread : ½” – 8”, Socket Weld : ½” – 8” |
Pressure Rating |
|
Features | Heat code Traceability / 100% Material annealed & Passivated / Wrench flat body allowing standard hex wrench assembly / great pressure sustaining capacity than traditional pipe class rating. / High quality surface CNC machined finish / Three chambers cleaning system ( Surface Preparation, Ultrasonic degreasing, Hot Dry Air) |
DIMENSION OF SOCKET WELD FITTINGS
DIMENSION OF SOCKET WELD FITTINGS | |||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DN | Nominal Pipe Size | Socket Bore Diameter | Bore Diameter of Fittings, D (Note-1) | Socket Wall Thickness, C (Note-2) | Body Wall, G | Min. Depth of Socket J | Center to Bottom of Socket, A | Laying Lengths | Tolerance,+- | End Wall Thickness Kmin | |||||||||||||||||||
Class Designation | Class Designation | 90-deg Elbow Tees & Crosses | 45-deg Elbow | ||||||||||||||||||||||||||
Class Designation | 3000 | 6000 | 9000 | 3000 | 6000 | 9000 | Class Designation | Couplings, E | Half Couplings, F | A | E | F | Class Designation | ||||||||||||||||
B | 3000 | 6000 | 9000 | Avg. | Min. | Avg. | Min. | Avg. | Min. | Min. | Min. | Min. | 3000 | 6000 | 9000 | 3000 | 6000 | 9000 | 3000 | 6000 | 9000 | ||||||||
6 |
1/8 |
11.2 | 7.6 | 4.8 | . . . |
3.18 |
3.18 |
3.96 |
3.43 |
. . . |
. . . |
2.41 |
3.15 |
. . . |
9.5 |
11.0 |
11.0 |
. . . |
8.0 |
8.0 |
. . . |
6.5 |
16.0 |
1.0 |
1.5 |
1.0 |
4.8 |
6.4 |
. . . |
10.8 | 6.1 | 3.2 | . . . | ||||||||||||||||||||||||||
8 |
1/4 |
14.6 | 10.0 | 7.1 | . . . |
3.78 |
3.30 |
4.60 |
4.01 |
. . . |
. . . |
3.02 |
3.68 |
. . . |
9.5 |
11.0 |
13.5 |
. . . |
8.0 |
8.0 |
. . . |
6.5 |
16.0 |
1.0 |
1.5 |
1.0 |
4.8 |
6.4 |
. . . |
14.2 | 8.5 | 5.6 | . . . | ||||||||||||||||||||||||||
10 |
3/8 |
18.0 | 13.3 | 9.9 | . . . |
4.01 |
3.50 |
5.03 |
4.37 |
. . . |
. . . |
3.20 |
4.01 |
. . . |
9.5 |
13.5 |
15.5 |
. . . |
8.0 |
11.0 |
. . . |
6.5 |
17.5 |
1.5 |
3.0 |
1.5 |
4.8 |
6.4 |
. . . |
17.6 | 11.8 | 8.4 | . . . | ||||||||||||||||||||||||||
15 |
1/2 |
22.2 | 16.6 | 12.5 | 7.2 |
4.67 |
4.09 |
5.97 |
5.18 |
9.35 |
8.18 |
3.73 |
4.78 |
7.47 |
9.5 |
15.5 |
19.0 |
25.5 |
11.0 |
12.5 |
15.5 |
9.5 |
22.5 |
1.5 |
3.0 |
1.5 |
6.4 |
7.9 |
|
21.8 | 15.0 | 11.0 | 5.6 | ||||||||||||||||||||||||||
20 |
3/4 |
27.6 | 21.7 | 16.3 | 11.8 |
4.90 |
4.27 |
6.96 |
6.04 |
9.78 |
8.56 |
3.91 |
5.56 |
7.82 |
12.5 |
19.0 |
22.5 |
28.5 |
13.0 |
14.0 |
19.0 |
9.5 |
24.0 |
1.5 |
3.0 |
1.5 |
6.4 |
||
27.2 | 20.2 | 14.8 | 10.3 | ||||||||||||||||||||||||||
25 |
1 |
34.3 | 27.4 | 21.5 | 16.0 |
5.69 |
4.98 |
7.92 |
6.93 |
11.38 |
9.96 |
4.55 |
6.35 |
9.09 |
12.5 |
22.5 |
27.0 |
32.0 |
14.0 |
17.5 |
20.5 |
12.5 |
28.5 |
2.0 |
4.0 |
2.0 |
9.6 |
||
33.9 | 25.9 | 19.9 | 14.4 | ||||||||||||||||||||||||||
32 |
11/4 |
43.1 | 35.8 | 30.2 | 23.5 |
6.07 |
5.28 |
7.92 |
6.93 |
12.14 |
10.62 |
4.85 |
6.35 |
9.70 |
12.5 |
27.0 |
32.0 |
35.0 |
17.5 |
20.5 |
22.5 |
12.5 |
30.0 |
2.0 |
4.0 |
2.0 |
9.6 |
||
42.7 | 34.3 | 28.7 | 22.0 | ||||||||||||||||||||||||||
40 |
1 1/2 |
49.2 | 41.6 | 34.7 | 28.7 |
6.35 |
5.54 |
8.92 |
7.80 |
12.70 |
11.12 |
5.08 |
7.14 |
10.15 |
12.5 |
32.0 |
38.0 |
38.0 |
20.5 |
25.5 |
25.5 |
12.5 |
32.0 |
2.0 |
4.0 |
2.0 |
11.2 |
||
48.8 | 40.1 | 33.2 | 27.2 | ||||||||||||||||||||||||||
50 |
2 |
61.7 | 53.3 | 43.6 | 38.9 |
6.93 |
6.04 |
10.92 |
9.50 |
13.84 |
12.12 |
5.54 |
8.74 |
11.07 |
16.0 |
38.0 |
41.0 |
54.0 |
25.5 |
28.5 |
28.5 |
19.0 |
41.0 |
2.0 |
4.0 |
2.0 |
12.7 |
||
61.2 | 51.7 | 42.1 | 37.4 | ||||||||||||||||||||||||||
65 |
2 1/2 |
74.4 | 64.2 | . . . | . . . |
8.76 |
7.67 |
. . . |
. . . |
. . . |
. . . |
7.01 |
. . . |
. . . |
16.0 |
41.0 |
. . . |
. . . |
28.5 |
. . . |
. . . |
19.0 |
43.0 |
2.5 |
5.0 |
2.5 |
15.7 |
||
73.9 | 61.2 | . . . | . . . | ||||||||||||||||||||||||||
80 |
3 |
90.3 | 79.4 | . . . | . . . |
9.52 |
8.30 |
. . . |
. . . |
. . . |
. . . |
7.62 |
. . . |
. . . |
16.0 |
57.0 |
. . . |
. . . |
32.0 |
. . . |
. . . |
19.0 |
44.5 |
2.5 |
5.0 |
2.5 |
19.0 |
||
89.8 | 76.4 | . . . | . . . | ||||||||||||||||||||||||||
100 |
4 |
115.7 | 103.8 | . . . | . . . |
10.69 |
9.35 |
. . . |
. . . |
. . . |
. . . |
8.56 |
. . . |
. . . |
19.0 |
66.5 |
. . . |
. . . |
41.0 |
. . . |
. . . |
19.0 |
48.0 |
2.5 |
5.0 |
2.5 |
22.4 |
||
115.2 | 100.7 | . . . | . . . |
Notes:
1) Upper and lower values for each size are the respective maximum and minimum dimension.
2) Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas
THREADED FITTINGS
THREADED FITTINGS | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DN | Nominal Pipe Size | End-to-end Coupling, W | End-toEnd Cups, P | Outside Diameter, D | Min. End Wall Thickness G | Min. Length of thread N-1 | |||||||||
3000 | 6000 | 3000 | 6000 | 3000 | 6000 | 3000 | 6000 | B | L2 | ||||||
6 | 1/8 | 32 | 32 | 19 | . . . | 16 | 22 | 4.8 | . . . | 6.4 | 6.7 | ||||
8 | 1/4 | 35 | 35 | 25 | 27 | 19 | 25 | 4.8 | 6.4 | 8.1 | 10.2 | ||||
10 | 3/8 | 38 | 38 | 25 | 27 | 22 | 32 | 4.8 | 6.4 | 9.1 | 10.4 | ||||
15 | 1/2 | 48 | 48 | 32 | 33 | 28 | 38 | 6.4 | 7.9 | 10.9 | 13.6 | ||||
20 | 3/4 | 51 | 51 | 37 | 38 | 35 | 44 | 6.4 | 7.9 | 12.7 | 13.9 | ||||
26 | 1 | 60 | 60 | 41 | 43 | 44 | 57 | 9.7 | 11.2 | 14.7 | 17.3 | ||||
32 | 1 1/4 | 67 | 67 | 44 | 46 | 57 | 64 | 9.7 | 11.2 | 17.0 | 18.0 | ||||
40 | 1 1/2 | 79 | 79 | 44 | 48 | 64 | 76 | 11.2 | 12.7 | 17.8 | 18.4 | ||||
50 | 2 | 86 | 86 | 48 | 51 | 76 | 92 | 12.7 | 15.7 | 19.0 | 19.2 | ||||
65 | 2 1/2 | 92 | 92 | 60 | 64 | 92 | 108 | 15.7 | 19.0 | 23.6 | 28.9 | ||||
80 | 3 | 108 | 108 | 65 | 68 | 108 | 127 | 19.0 | 22.4 | 25.9 | 30.5 | ||||
100 | 4 | 121 | 121 | 68 | 75 | 140 | 159 | 22.4 | 28.4 | 27.7 | 33.0 |
Note :
1) Dimensions are in Millimeters.Note :Note :
2) Class 2000 and NPS 1/8 class 6000 couplings, half couplings, and caps are not included in this standard.
3) The wall thickness away from the threaded ends shall meet the minimum wall thickness requirements of
Table 5 for the appropriate NPS and class Designation fitting.
4) Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American National Standard for pipe Threads (ASME B1.20.1).
PLUGS AND BUSHINGS
PLUGS AND BUSHINGS | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DN | Nominal Pipe Size | Mini. Length | Square Head Plugs. | Round Head Plugs | Hex Plugs and Bushing | ||||||||||
Mini. Square Height. | Mini. Width Flats | Nominal Head Diameter | Mini. Length | Nominal Width Flats | Min. Hex Height | ||||||||||
A | B | C | E | D | F | G | H | ||||||||
6 | 1/8 | 10 | 6 | 7 | 10 | 35 | 11 | . . . | 6 | ||||||
8 | 1/4 | 11 | 6 | 10 | 14 | 41 | 16 | 3 | 6 | ||||||
10 | 3/8 | 13 | 8 | 11 | 18 | 41 | 18 | 4 | 8 | ||||||
15 | 1/2 | 14 | 10 | 14 | 21 | 44 | 22 | 5 | 8 | ||||||
20 | 3/4 | 16 | 11 | 16 | 27 | 44 | 27 | 6 | 10 | ||||||
26 | 1 | 19 | 13 | 21 | 33 | 51 | 36 | 6 | 10 | ||||||
32 | 1 1/4 | 21 | 14 | 24 | 43 | 51 | 46 | 7 | 14 | ||||||
40 | 1 1/2 | 21 | 16 | 28 | 48 | 51 | 50 | 8 | 16 | ||||||
50 | 2 | 22 | 18 | 32 | 60 | 64 | 65 | 9 | 18 | ||||||
65 | 2 1/2 | 27 | 19 | 36 | 73 | 70 | 75 | 10 | 19 | ||||||
80 | 3 | 28 | 21 | 41 | 89 | 70 | 90 | 10 | 21 | ||||||
100 | 4 | 32 | 25 | 65 | 114 | 76 | 115 | 13 | 25 |
Note :
1) Dimensions are in Millimeters.
2) Cautionary Note Regarding Hex Bushings; Hex head bushings of one size reduction should not be used in services where they might be subject to harmful loads and forces other than internal pressures.
FORGED THREADED FITTINGS
FORGED THREADED FITTINGS | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DN | Nominal Pipe Size | Center-to-End Elbow, Tees, Crosses A | Center-to-End 45 deg Elbow, C | Outside Diameter of Band, H | Min. Wall Thickness G | Min. Length of Thread N-1 | |||||||||
2000 | 3000 | 6000 | 2000 | 3000 | 6000 | 2000 | 3000 | 6000 | 2000 | 3000 | 6000 | B | L2 | ||
6 | 1/8 | 21 | 21 | 25 | 17 | 17 | 19 | 22 | 22 | 25 | 3.18 | 3.18 | 6.35 | 6.4 | 6.7 |
8 | 1/4 | 21 | 25 | 28 | 17 | 19 | 22 | 22 | 25 | 33 | 3.18 | 3.30 | 6.60 | 8.1 | 10.2 |
10 | 3/8 | 25 | 28 | 33 | 19 | 22 | 25 | 25 | 33 | 38 | 3.18 | 3.51 | 6.98 | 9.1 | 10.4 |
15 | 1/2 | 28 | 33 | 38 | 22 | 25 | 28 | 33 | 38 | 46 | 3.18 | 4.09 | 8.15 | 10.9 | 13.6 |
20 | 3/4 | 33 | 38 | 44 | 25 | 28 | 33 | 38 | 46 | 56 | 3.18 | 4.32 | 8.53 | 12.7 | 13.9 |
26 | 1 | 38 | 44 | 51 | 28 | 33 | 35 | 46 | 56 | 62 | 3.68 | 4.98 | 9.93 | 14.7 | 17.3 |
32 | 1 1/4 | 44 | 51 | 60 | 33 | 35 | 43 | 56 | 62 | 75 | 3.89 | 5.28 | 10.59 | 17.0 | 18.0 |
40 | 1 1/2 | 51 | 60 | 64 | 35 | 43 | 44 | 62 | 75 | 84 | 4.01 | 5.56 | 11.07 | 17.8 | 18.4 |
50 | 2 | 60 | 64 | 83 | 43 | 44 | 52 | 75 | 84 | 102 | 4.27 | 7.14 | 12.09 | 19.0 | 19.2 |
65 | 2 1/2 | 76 | 83 | 95 | 52 | 52 | 64 | 92 | 102 | 121 | 5.61 | 7.65 | 15.29 | 23.6 | 28.9 |
80 | 3 | 86 | 95 | 106 | 64 | 64 | 79 | 109 | 121 | 146 | 5.99 | 8.84 | 16.64 | 25.9 | 30.5 |
100 | 4 | 106 | 114 | 114 | 79 | 79 | 79 | 146 | 152 | 152 | 6.55 | 11.18 | 18.67 | 27.7 | 33.0 |
Note :
1) Dimensions are in Millimeters.
2) Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American National Standard for pipe Threads (ASME B1.20.1).
Ordering Information
As Per Our Design
Materials | |
---|---|
Type Of Materials | Nomen. |
S S310 | S1 |
SS316 | S6 |
SS316L | S6L |
SS317 | S7 |
SS321 | S21 |
Monal 400 | M4 |
Incoloy 625 | I6 |
Incoloy 825 | I8 |
Carbon Steel | CS |
ASTM A105 | A1 |
Alloy 20 | A20 |
ASTM A182 F53 (Super Duplex F53) | F53 |
ASTM A182 F51 ( F51) | F51 |
ASTM A182 F60 ( F60) | F60 |
ASTM A234 Gr. WPB | WPB |
Mild Steel | MS |
Nickel alloy | NA |
Galvanized | GLV |
ASTM A403 Gr.. WPXXX | WP6, WP4 |
Sizes | |
---|---|
Size | Nomen. |
1/8″ | 6 |
1/4″ | 8 |
3/8″ | 10 |
1/2″ | 15 |
3/4″ | 20 |
1″ | 25 |
1 1/4″ | 32 |
1 1/2″ | 40 |
2″ | 50 |
2 1/2″ | 65 |
3″ | 80 |
4″ | 100 |
5″ | 125 |
6″ | 150 |
8″ | 200 |
10″ | 250 |
12″ | 300 |
14″ | 350 |
16″ | 400 |
18″ | 450 |
Type of Fittings | |
---|---|
Type | Nomen. |
45 Degree Elbow | 4EL |
90 Degree Elbow | EL |
Long Nipple | L-NI |
Long Swage Nipple | LS-NI |
Nipple | NI |
Barrel Nipple | BN |
Tee | T |
Unequal Tee | UT |
Cross | CR |
Sockolet | SK |
Half Coupling | HC |
Full Coupling | FC |
Connector | CN |
Eccentric Reducer | ER |
Reducer | R |
Swage Nipple | SN |
Union | UN |
Cap | CA |
Coupling | CU |
Elbolet | EL |
Long Radius | LR |
Short Radius | SR |
Weldolet | WL |
End Connection | |
---|---|
Type | Nomen. |
Butt Weld | BW |
Socket Weld | SW |
NPT Thread (Male) | NM |
BSP Thread (Male) | BM |
NPT Thread (Female) | NF |
BSP Thread (female) | BF |
Plain End | PL |
Bevel End | BE |
Type Of Class | |
---|---|
Types | Nomen. |
Class 2000 | #2000 |
Class 3000 | #3000 |
Class 6000 | #6000 |
Class 9000 | #9000 |
Class C | CL ‘C’ |
Class A | CL ‘A’ |
Sch 10 | S10 |
Sch 20 | S20 |
Sch 40 | S40 |
Sch 80 | S80 |
Sch 160 | S160 |
Sch XXS | SXXS |
Sch 120 | S120 |
Sch 10S | S10S |
Sch 40S | S40S |
Ex. LONG RADIUS ELBOW 90° = -15-EL-LR-BW-SCH